Quick Start GuideUpdated 3 days ago

Assembly

1. Unbox the fan and ensure all parts are present.
2. Place on a flat, stable surface before use.
3. Install HEPA Filter:
     • Remove the air inlet grille.
     • Remove the pre-filter by pressing either side and pulling out.
     • Unwrap the HEPA filter and install with “FRONT” tabs facing outward.
     • Reinstall the pre-filter and grille.
   
   

Control Panel Overview

• Power Button: Turn the unit on/off

• Fan Speed Button: Cycle fan speeds or select Eco/Night modes

• Mode Button: Switch between Sleep, Natural, Air Purifier, and Standard Fan

• Oscillation Button: Start/stop oscillation

• Temperature Control Button: Adjust fan speed based on room temperature

• Timer Button: Set a timer from 1–12 hours

• Light Button: Turn air quality light on/off

Display Panel Overview

1. Air Quality Light:
     • Blue = Very Good • Green = Good • Yellow = Fair • Red = Poor
2. Fan Speed Display: Shows levels 1–10
3. Mode Icons: Fan / Natural / Night / Air Quality
4. Temperature Display: Shows ambient temperature (auto mode)
5. Filter Reminder Icon: Lit when filter needs replacing
6. Temperature Control Icon: Lit when active
7. Wi-Fi Indicator: Blinks when ready to pair
     → Hold Fan Speed + Oscillation for 3 seconds to activate
   
   

Remote Control Functions

1. Power Button: Turn the unit on/off
2. Mode Button: Cycle between Fan, Night, and Natural modes
3. Fan Speed (+/–): Adjust fan speed
4. Temperature Control: Turn on/off
5. Timer Button:
     • When OFF: Set turn-on (1–7h)
     • When ON: Set turn-off (1–7h)
6. Oscillation Button: Start/stop oscillation
   
   

Choosing a Mode

• Fan Mode: Adjustable speed 1–10

• Natural Mode: Auto-cycles speed for natural airflow

• Night Mode: Gradually reduces fan speed for quiet sleep
 (Display turns off after 60 seconds)

• Air Quality Mode: Fan speed adjusts automatically based on air quality

Temperature Control

 • Adjusts fan speed based on room temperature changes:

  • ≥30°C: +2 speed levels per +1°C
  • <30°C: +1 speed level per +1°C
  • ≥31°C: –2 levels per –1°C
  • <31°C: –1 level per –1°C
  • <10°C: Defaults to speed level 1
  • ≥40°C: Auto mode deactivates, switches to Natural Mode

Timer Settings

• Set Turn-On Timer:
  When off, press the Timer button until desired time (1–12h) appears

• Set Turn-Off Timer:
  When on, press the Timer button to set shut-off time

• To Cancel: Continue pressing until timer lights turn off

Oscillation

 • Press Oscillation button once to start/stop side-to-side motion

• Do not rotate manually - may damage internal mechanism