Getting Started with EasyFreezyUpdated 2 hours ago

How do I set up EasyFreezy for the first time? 

After unpacking EasyFreezy, keep the machine upright and allow it to stand for at least 2 hours before first use. This allows the refrigerant to settle before operation. 

Before assembling the tub, make sure all removable parts are clean and completely dry. 

To get started: 

1. Fit the bottom seal securely inside the tub.
2. Attach the dispense handle and lock ring.
3. Fit the locking cap and turn it clockwise until fully tightened.
4. Attach the top seal.

5. Position the mixing paddle correctly.
6. Fit the tub to the machine and rotate it anticlockwise until it clicks into place.
7. Make sure the dispense handle is in the OFF position before adding your ingredients.

If the locking cap, top seal or bottom seal isn’t fitted correctly, the machine may leak.

What do the buttons on EasyFreezy do? 

EasyFreezy has four main controls: 

• Power:
  Turns the machine on or off. 
  
  
• Mode:
  Cycles through the available EasyFreezy programmes. 
  
  
• Start/Stop:
  Starts or stops the selected programme or cleaning cycle. 
  
  
• + / – Thickness Controls:
  Adjust your target texture. A higher thickness setting will create a thicker finished result. 

What modes does EasyFreezy have?

EasyFreezy includes dedicated programmes for: 

• Ice Cream — For smooth, creamy soft-serve style desserts. 
  
  
• Cocktail — For frozen cocktails such as daiquiris and piña coladas. 
  
  
• Margarita — For thick, smooth frozen margaritas. 
  
  
• Slushie — For classic frozen drinks made with soft drinks, juices or syrups. 
  
  
• Fruit Slushie — For drinks made using smooth fruit juices or purées. 
  
  
• Milkshake — For thick, creamy milkshakes. 
  
  
• Frappé — For chilled coffee-style frozen drinks. 
  
  
• Clean — Runs the self-cleaning rinse cycle.